New ambulance in Switzerland

Manufacturing a new ambulance in Switzerland

Whether you are renewing your fleet, creating a medical transport service, or need to replace a vehicle that has reached the end of its life: the purchase of a new ambulance is a commitment for ten to fifteen years of operation.

PNX Rescue designs and manufactures new, custom-made ambulances in Geneva, for the whole of Switzerland.

A new ambulance isn't a vehicle you choose from a catalog. The chassis, the passenger compartment volume, the equipment layout, and the electrical system are all determined by the specific missions you perform: primary care, secondary transfers, mobile intensive care, neonatal transport, or bariatric transport. That's why every project begins with an analysis of your operations, not with a purchase order.

Our four founders have been working in pre-hospital care for over twenty years. This experience is reflected in details that are not visible on a plan but that change the life of a crew: the height of a work surface, the position of a storage unit, the passage of a cable. Meet our team.

New or used ambulance: how to choose

Both solutions are legitimate, and we propose both. The right choice depends less on the available budget than on the intended operating period and the urgency of commissioning.

CriteriaNew ambulanceRefurbished used ambulance
Initial investmentThe highestSignificantly inferior
Commissioning timeDepends on chassis availabilityThe shortest way: the vehicle already exists
Remaining operating timeMaximum, complete cycleReduced according to mileage and the age of the carrier
Level of customizationIn total: nothing is inheritedLimited by the existing architecture
Manufacturer's warranty on the chassisFull and completeDepending on the age of the vehicle
Typical use caseFrontline vehicle, intensive operation, type CFleet reinforcement, reserve vehicle, initial equipment

In practice, the decision often comes down to two questions. How many years do you plan to operate this vehicle? And can you wait for a new one to be manufactured? If you're aiming for a full service life on a busy shift, a new vehicle is almost always the right answer, because the cost of keeping a worn-out vehicle out of service eventually outweighs the initial price difference. If you need to quickly expand a fleet or equip a newly established department, a refurbished vehicle is a viable option, provided it has been properly upgraded.

Discover our offer of’used ambulance in Switzerland. We apply the same rigorous inspection and refurbishment requirements to these vehicles as we do to our new ambulances.

Available configurations

A new ambulance can take many forms depending on your mission. Here are the ones we build.

Ambulance with a compartment

The cell is manufactured separately and then mounted on the chassis. Our Rescube chamber It rests on an internal aluminum structure, 2 mm thick inner and outer walls, and a 42 mm polyurethane foam core, meeting DIN 13500 safety standards, with excellent thermal and acoustic insulation. Its main advantage over time: the unit is removable and transferable to a new chassis at the end of the vehicle's life. For a fleet that is regularly renewed, this changes the economic equation.

Ambulance with a compartment

The cell is manufactured separately and then mounted on the chassis. Our Rescube chamber It rests on an internal aluminum structure, 2 mm thick inner and outer walls, and a 42 mm polyurethane foam core, meeting DIN 13500 safety standards, with excellent thermal and acoustic insulation. Its main advantage over time: the unit is removable and transferable to a new chassis at the end of the vehicle's life. For a fleet that is regularly renewed, this changes the economic equation.

Converted van ambulance

The conversion is carried out directly within the vehicle's body. Lighter and more accessible, this solution better preserves payload and is perfectly suited for medical transport and secondary interventions. Discover our custom-built ambulance van.

Specialized vehicles

The same research methodology applies beyond human rescue. In particular, we have designed a veterinary ambulance for the BIOPARC Geneva, with dedicated compartments and adapted immobilization devices. We also build TPMR vehicles for transporting people with reduced mobility. For a temporary need, you can also rent a wheelchair accessible vehicle.

Are you hesitating between a box van and a van? The detailed comparison can be found on our page custom ambulance manufacturer.

Order processing and timeline

The timeline for a new ambulance depends on two variables, and neither is workshop time: the chassis availability at the manufacturer's, and the expert assessment deadlines from the motor vehicle department of your canton. That's why we don't give a standard timeframe: we provide you with a firm schedule along with the quote, once the chassis has been identified and the configuration finalized.

The process is as follows: analysis of your missions, ergonomic study of the unit, chassis selection, validation of the layout plans by you, manufacturing of the unit, electrical and medical integration, homologation, quality control and road tests, then handover to your teams and delivery. No production begins without your written approval of the plans. A complete description of each step is available on our page. manufacturer of custom-built ambulances in Switzerland.

If your deadline is shorter than the manufacturing lead time, two alternatives exist: one refurbished used ambulance, or the conversion of a vehicle already in your fleet. We prefer to guide you towards the right solution rather than commit you to an unrealistic timeline.

Brand new Binz ambulance sold in Switzerland by PNX Rescue

Compliant with EN 1789 and Swiss approved

A new ambulance that does not conform will not be approved: this is the constraint that structures the entire project, and it must be decided before the choice of chassis.

The European standard IN 1789, The regulation, "Medical Transport Vehicles and their Equipment – Road Ambulances," sets out the requirements for design, testing, performance, and equipment. It does not address registration or crew training, which fall under the jurisdiction of national and cantonal authorities. It defines three levels: A1 and A2, Type B And Type C.

Each category imposes its own requirements for volume, anchoring, power supply, and onboard equipment. A Type C vehicle is not built on the same chassis as a Type A, and the additional cost is significant: defining the target category is therefore the first decision to be made, even before establishing a budget. We will assist you with this from the very first discussion, including when it comes to drafting specifications for a public tender.

In Switzerland, homologation is handled by the motor vehicle department of your canton. We prepare the technical file and provide it to you upon delivery.

Our partners

Frequently Asked Questions

What is the waiting time for a new ambulance in Switzerland?

It depends primarily on the availability of the chassis from the manufacturer and the inspection times in your canton, much more so than on workshop time. We provide a firm schedule with the quote once the configuration is finalized, and we keep you informed at every stage. If your deadline is tight, a refurbished used ambulance or the conversion of an existing vehicle allows for significantly faster deployment.

The Mercedes-Benz Sprinter is the preferred choice in the vast majority of cases, thanks to its payload capacity, reliability, and extensive service network in Switzerland. Our partnership with the Pierre Steulet SA network gives us direct access to vehicle configurations and post-delivery technical support. Other options remain available depending on your existing fleet agreements.

Four elements account for the bulk of the budget: the category targeted according to the EN 1789 standard, the choice between box and van, the chassis configuration, and the on-board medical equipment.

A type C and a type A are not in the same ballpark. We itemize each component separately in our quotes, so you can make an informed decision rather than relying on a single overall price.

Yes, if you opt for a box-section ambulance. The patient compartment can be removed and reinstalled on a new chassis at the end of the carrier's life: you only replace the rolling part. This is the main advantage of the box-section for long-term use. A converted van, on the other hand, remains tied to its vehicle.

Yes. We are based in Geneva and deliver to all cantons, in French-speaking Switzerland, German-speaking Switzerland, and Ticino. The initial consultation can be conducted remotely or at your premises, according to your preference.

Let's talk about your new ambulance project

Describe your objectives, deadlines, and fleet constraints: we'll call you back for a free, no-obligation consultation. The more precise your request, the more helpful our initial response will be.

You can also contact us directly Or Discover our achievements.